Return to the Heating & Air Conditioning Forum
| Post a Follow-Up
Removing Chronotherm III from base, to change batteries
| | |
Posted by suburbanmd (My Page) on Thu, Mar 11, 10 at 11:21
| The instructions for my Chronotherm III say to loosen the captive screws at the lower corners, then pull the unit out from the bottom. But when I went to loosen the screws, they were already loose, and the thermostat won't come off the base. I've tried pushing the tabs at the bottom, no luck. Is there some trick to this? Thanks. |
Follow-Up Postings:
RE: Removing Chronotherm III from base, to change batteries
| | |
| make sure the 2 screws are complete loose or better, out and hold the top in place while pulling from the bottom. It will come out from the bottom first and then lift off. It won't break. ;) |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Heating & Air Conditioning Forum
|
|
|
